To replace a water filter cartridge

To replace a cartridge of water filter system on your home water filter. This article describes how to change both on a system of filter Aquasana AQ4000 filter.

Some of this information can be useful for all brands of filter system. Unpack, check the new filter kit and its contents. We recommend 2 cartridges water filter replacement, A and B. Two Spare O-ring. If O-rings are not flat, they create and see if you can flatten their own take on thisNight. If this does not work, put a book on it during the night. The reason is that, if the O-rings are bent from shipping makes it difficult to make a good seal.

Water Filter

The first step is to put the home water filtration system on its side. You can see marked on the filter capacitors are A and B. In addition, the arrows to rotate the way to solve any kind of hat. A right turn filter cover to unscrew or direction of the arrow. B filter cap should be loose on the left or the direction of the arrow. Youmust be kept on hand. If they are too narrow to be removed by hand from the handles of pliers to help you use a little 'more. Be careful not to damage the inlet or outlet water lines.

A water filter cartridge will remove the most difficult. The seal on the top of the filter keeps the cartridge in place. There is not enough space in the airbox to get a hold. I find it easy to use pliers, a maintenance of the filter and turn and pull out.Water filter cartridge B is the filter covers are attached. Simply twist and pull the two pieces. Lay the filter on each side of the filter housing. This helps track the filters A and B. Remove the two O-rings ensure that the grove, where they sit to keep clean. Now install two new O-ring. Apply a small amount of silicone grease food on the exposed area of ​​each O-ring. This helps with the installation of filter capacitors. The oil can easily slide the lid on the rubber,it is easier to seal. The installation can be dry and bend to the market with consequent loss.

replacement cartridge water filter A is white. To install the housing-end cartridge with O-ring in the first place. Put a little water on the rubber seal makes it easy to slip. Give it a push and turn until it is seated. The replacement cartridge B is blue. Install the O-ring in the end filter cover. In the same way as the other filters. At this point, I check the O-ringto ensure they continue to do. Then go ahead and install the body B in the B filter. Screw the cap B until it is resolved. Now check the tightness of others and install a security until it is resolved.

Keep the filter system on one side, turn on the water and turn the diverter valve. Check arguments cap for signs of water. If the loss of a little ', try to tighten the cap a bit' more. If this does not seal the leak, then open the cover and the O-ringcould come from her home. Check to see if it will not be cut or damaged. If so, can the old O-ring again. The other option is to save one of the seals at your old local hardware store and match up. The step, if none of these ideas is to work to order a replacement seal. Now you can be refitted the cover, as described above and any such loss.

If you do not want to see, running make losses of AQ-4000 water right and leave for about 2-3 minutes until the water is clean.Water may be cloudy at first, or even a black color, this is normal. The coal dust is cleaned by the new filter cartridges. Can I save the water for irrigation, the filter system used. Indoor plants such as water, or put on plants of the page. To keep track of when to install it time for the next series of new water filters. Write the date of the next replacement on a piece of tape and put it on the filter. This helps to keep track of time. They must be replaced every 6 months or500 liters of water in the filtration system at home.

To replace a water filter cartridge

rinehart true dual exhaust system rawlings leather messenger bag